Mobilistics

Return To Home

 Brake Alert ™ Third Brake Light Safety Control Module

Only available through authorized new car dealerships

Makes your Vehicle Highly Visible when you Apply the Brakes

Size: 1" W x 1"L x 3/4" H

 

Increase your safety !

Super Small ...installs inside High Mounted Brake Light Housing. (4) one second pulses then to bright delivers a highly effective way to get the attention of the person behind you that you have applied the brakes. Right and Left Brake lights work normally.

The BBL-1 works on ANY type of standard incandescent or LED lighting. Operates 1 brake lamp containing up to 3 bulbs or 55 LED's, (up to 5 amps). The BBL-1 simply connects to positive and negative wires powering you lamp. Hardware includes a quick disconnect system for quick removal and reconnect wiring.

• Meets all California State requirements. Blinks 4 times in four seconds then goes bright.

• Installs in 5 minutes on most vehicles.

• EZ installation instructions.

• Includes all necessary hardware.

Model # BBL-1

return to home

 

©2005 Mobilistics, LLC

 

 

 

 Brake Alert2™ Third Brake Light Safety ADJUSTABLE Control Module

Only available through authorized new car dealerships

Makes your Vehicle Highly Visible when you Apply the Brakes

Size: 1" W x 1"L x 3/4" H

VIEW INSTRUCTIONS

Increase your safety !

Super Small ...installs inside High Mounted Brake Light Housing. Fully Adjustable Pulse operates up to 16 pulses in up to 10 seconds. Factory setting is (4) one second pulses then to bright which delivers a highly effective way to get the attention of the person behind you that you have applied the brakes. Right and Left Brake lights work normally.

The BBL-2 works on ANY type of standard incandescent or LED lighting. Operates 1 brake lamp containing up to 3 bulbs or 55 LED's, (up to 5 amps). The BBL-2 simply connects to positive and negative wires powering you lamp. Hardware includes a quick disconnect system for quick removal and reconnect wiring.

• Fully Adjustable to meet any requirements in your area. Meets all California State requirements with Factory settings...Blinks 4 times in four seconds then goes bright.

• Installs in 5 minutes on most vehicles.

• EZ installation instructions.

• Includes all necessary hardware.

Model # BBL-2

 

 

 

NEW! Available NOW #LSC-100.....Cycle Brake Alert™ Pulsating Brake Light Safety Control Module

Made for Motorcycle Safety

LOW COST..EASY TO INSTALL..FULLY ADJUSTABLE.

Makes your Vehicle Highly Visible when you Apply the Brakes

Size: 1" W x 1"L x 3/4" H

 

Increase your safety !

Super Small ...installs inside your Motorcycle Brake Light Housing. Fully Adjustable Pulse operates up to 16 pulses in up to 10 seconds. Factory setting is (4) one second pulses then to bright which delivers a highly effective way to get the attention of the person behind you that you have applied the brakes.

The BBL-M works on ANY type of standard incandescent or LED lighting. Operates 1 brake lamp containing up to 3 bulbs or 55 LED's, (up to 5 amps). The BBL-M simply connects to positive and negative wires powering you lamp. Hardware includes a quick disconnect system for quick removal and reconnect wiring.

• Fully Adjustable to meet any requirements in your area.

• Custom Electronics for Motorcycle Applications.

• Installs in 5 minutes on most Motorcycles.

• EZ installation instructions.

• Includes all necessary hardware.

Model # BBL-M

 

return to home

 

©2012 Mobilistics, LLC